This restaurant equipment site is owned and operated by FPG - Foodservice Purchasing Group 1-800-471-1121   5302 W Crenshaw St   Tampa, FL  33634  USA

• Coldest Holding Temperatures - True manufactures its refrigerators to maintain a holding temperature of 33°F to 38°F and manufactures its freezers to maintain a holding temperature of -10°F*. Industry standards and their competitors holding temperatures are 40°F+ and 0°F to 5°F respectively. True’s colder temperatures lengthen product shelf life and dramatically reduce bacteria growth for added food safety..
  
  
• Energy Efficiency - By oversizing the refrigeration systems, True’s run time is 20 to 30% less than their competitors. This exceeds industry energy efficiency expectations. This provides our customers with three very important benefits:
  
• Lower Utility Costs.
• Better Food Safety.
• Longer Life Span of the Refrigeration System.
  
  
• High Quality Metals - True provides an industry leading combination of high quality metal. The “T” Series and “TM” series are designed with the finest stainless steel available, (300 series), on cabinet fronts, and coated aluminum exterior sides and backs. This metal combination nicely matches the 300 series cabinet front. The cabinet interiors consist of an NSF approved, white vinyl coated aluminum wall and ceiling for a bright interior appearance that is easy to clean. True’s “TS” line offers an all 300 series stainless interior and exterior front and sides. The back is a matching coated aluminum. True also offers the exclusive “TR” line featuring 300 series stainless for both interior and exterior, bottom and back.
  
  
• Foaming Method - True’s foamed-in-place, polyurethane, high-density cell insulation, enables True to exceed the R-value of the other commercial refrigerators using only a 1 3/4” sidewall (vs. a standard 2” to 3” sidewall for others). This higher R-value reduces utility costs, while the denser cell rating adds strength & rigidity to the cabinet.
  
  
• Evaporator - True provides their customers with the largest evaporators in the industry, 20 to 40% larger. Their copper tubing is 1/2” diameter vs. a standard 3/8” for the rest of the industry. Oversizing the coils provides customers with faster pull-down of warm products. Additionally, True is the only manufacturer that epoxy coats all of the evaporator coils to protect the copper refrigerant tubing.
  
  
• Oversized Compressors - True led the industry many years ago by oversizing the compressors. This helps to guarantee food preservation and faster pull down of product temperatures. Today, True engineers oversized, environmentally friendly refrigeration systems giving the customer shorter run times, lower energy consumption and the industry’s coldest holding temperatures at no additional cost.
  
  
• Condensors - In keeping with True’s manufacturing standard of oversizing the entire refrigeration system, they install the largest condensers in the industry. For example, on a standard two door upright, the industry uses a 25-30 pass condenser; at True, that same unit receives a 40 pass condenser.
  
  
• Energy Efficient “Low-E” Thermal Glass - “True’s “Low-E” glass is the latest in energy efficiency technology- Low-E”double pane glass reflects UV rays and provides improved insulation resulting in decreased compressor run time, reducing your energy costs.
  
  
• 100% Testing Of All Units Manufactured - At True, they take pride in a program of run testing every single unit that is produced. Every refrigerator is run-tested 4-6 hours and every freezer is run-tested 16-18 hours.
  
  
• Freezers That Are Built To A -10°F Standard - True manufactures all freezers to maintain a -10°F cabinet temperature standard*. Other manufacturers who offer this typically up-charge $700 to $1,500 (mfr. list) for this feature. Frozen foods: meats, seafood and ice cream, last considerably longer and maintain better quality at •-10°F than at the industry standard 0°F to 5°F.
  
  
• Frame Rail - The heavy duty frame rail is built-to-last. Their robotic welders use a minimum 1/2” full weld around the frame. They then dip the frame in a rust inhibiting paint to protect the inside and the outside.
  
  
• Evaporator Fan Motors - True uses only completely sealed, cast-iron, oil filled, low velocity fan motors with a life expectancy of 15 to 20 years. Most competitors use an open-winding, high velocity fan motor with a life expectancy of 2 to 4 years. True’s low velocity airflow and larger fan blades move a greater volume of air slowly across the evaporator. This results in faster pull-down of warm product and quicker recovery times.
  
  
• Exclusive 1-5-1 Warranty - True’s exclusive 5 year compressor/condensing unit warranty is the envy of the industry. At no additional cost, our customers enjoy the option of having the entire condensing unit replaced; which consists of a new compressor, condenser, start components, and fan motor, all of which are pre-assembled and shipped from the factory. True also includes a 1 year parts and labor warranty.
  
  
• Super Durable, PVC Coated Shelving - True’s shelves, rated at 250 lbs., are internally manufactured and a testament to quality. They construct shelves with larger diameter steel and bond them with heavy duty PVC to prevent chipping and peeling which is prevalent in standard epoxy coated shelves.
  
  
• Extraordinary Cabinet Strength - True’s high density foaming process and the fact that they insulate the entire cabinet from top-to-bottom, gives the equipment its extraordinary cabinet strength. Clear evidence of this is in the ability to stack four high in the warehouses.
  
  
• Industry Leadership - True is rated “Best In Class” by Foodservice Equipment & Supplies Magazine and an “Industry Leader” in ID Magazine. Both trade publications recognize True Food Service Inc. as distinctive in its ability to provide outstanding product service and support to the dealer community.